| Tri-Carb - 3 Flute Endmill for Roughing
|  | |
SGS Tri-Carb is designed to provide twice the amount of shear
available from conventional endmills ot overcome strength, work hardening
and high impact resistance of these metals |
|
| Speeds / Feeds
| Literature
| |
| Tri-Carb - Series 65 - 3 Flute Roughing Fractional
| | EDP | Cutting
Dia.
d1 | Shank
Dia.
d2 | LOC
l2 | OAL
l1 | Corner
Radius
| | 91200 | 1/8 | 1/8 | 1/4 | 1-1/2 | .010
| | 91201 | 3/16 | 3/16 | 5/16 | 2 | .010
| | 91202 | 1/4 | 1/4 | 3/8 | 2-1/2 | .010
| | 91203 | 5/16 | 5/16 | 7/16 | 2-1/2 | .010
| | 91204 | 3/8 | 3/8 | 1/2 | 2-1/2 | .011
| | 91205 | 1/2 | 1/2 | 5/8 | 3 | .015
| | 91206 | 5/8 | 5/8 | 3/4 | 3-1/2 | .019
| | 91207 | 3/4 | 3/4 | 1 | 4 | .023
| | 91208 | 1 | 1 | 1-1/4 | 4 | .030
|
|
| Tri-Carb - Series 65M - 3 Flute Roughing Metric
| | EDP | Cutting Dia.
d1 | Shank
Dia.
d2 | LOC
l2 | OAL
l1 | Corner
Radius
| | 91300 | 3 | 3 | 6 | 38 | 0.25
| | 91301 | 4 | 4 | 8 | 50 | 0.25
| | 91302 | 5 | 6 | 8 | 50 | 0.25
| | 91303 | 6 | 6 | 9 | 63 | 0.25
| | 91304 | 8 | 8 | 11 | 63 | 0.25
| | 91305 | 10 | 10 | 13 | 63 | 0.30
| | 91306 | 12 | 12 | 15 | 75 | 0.36
| | 91307 | 16 | 16 | 19 | 89 | 0.48
| | 91308 | 20 | 20 | 26 | 100 | 0.61
| |
